Image 1 of 32
Image 2 of 32
Image 3 of 32
Image 4 of 32
Image 5 of 32
Image 6 of 32
Image 7 of 32
Image 8 of 32
Image 9 of 32
Image 10 of 32
Image 11 of 32
Image 12 of 32
Image 13 of 32
Image 14 of 32
Image 15 of 32
Image 16 of 32
Image 17 of 32
Image 18 of 32
Image 19 of 32
Image 20 of 32
Image 21 of 32
Image 22 of 32
Image 23 of 32
Image 24 of 32
Image 25 of 32
Image 26 of 32
Image 27 of 32
Image 28 of 32
Image 29 of 32
Image 30 of 32
Image 31 of 32
Image 32 of 32
WH1749G C60 Trident Mk3 Pro 600 40mm (12/2022)
Quick facts
Reference: C60 Trident Mk3 Pro 600
Category: Dive
Size: Medium
Movement: Automatic
Condition: Very good
Christopher Ward (manufacturer) warranty: Expires December 2027
Buy it if you want: a refined diver with a higher spec than its Trident Pro 300 baby brother.
Description
The Trident Mk3 Pro 600 sits at the point where Christopher Ward’s dive‑watch design had fully settled. Following the broader Mk3 refresh launched in 2019, the Pro 600 carried forward the Light‑Catcher case, simplified dial language and calmer handset that marked the Trident’s coming of age. Rather than leaning into overt tool‑watch signalling, the emphasis was on cohesion and wearability. Despite its 600‑metre rating, the Pro 600 no longer felt defined by depth alone. It became the reference point for the modern Trident: balanced, confident and refined enough that later changes would be evolutionary rather than corrective.
What distinguished the Mk3 Pro 600 was a series of measured design decisions. The new Light‑Catcher case introduced cleaner transitions between surfaces and reduced perceived bulk on the wrist. Dial and handset were simplified, with the heavier Mk2 hands replaced by a more restrained design and the long‑standing lume pip at twelve removed entirely. Bracelets were reworked to suit the new case profile, gaining improved articulation and quick‑release spring bars. Case sizes were rationalised to 38mm, 40mm and 42mm, finally drawing a line under the earlier 43mm format.
Condition and performance
The watch is in very good condition with light signs of use.
Case: Clean with light marks observed on the lugs and side
Bezel: No marks observed
Crystal: Clear, no marks observed
Supplied on a CW bracelet with ratchet micro-adjust and quick release lugs showing light marks consistent with wear. Measures 16cm so will fit a wrist up to c. 20.5cm. Please ask if you need more links.
Comes boxed with owner’s manual, cleaning cloth (no case) and warranty booklet/card. Missing plastic insert.
Timegrapher: Approximately +11 seconds per day.
Strap options
Head only: £100 reduction
Replacement of existing bracelet for a standard unworn CW strap: £60 reduction.
Additional standard unworn CW strap: £50 increase
Subject to availability, standard unworn CW straps comprise vintage oak leather, hybrid, rubber and tropic.
Please send us a message and we will adjust the price accordingly.
We also offer 10% off our straps and bracelets listed in Accessories purchased alongside a watch.
Simply add the accessory to your basket and use STRAP10 or BRAC10 at checkout.
Generally, we list all our bracelets on our Accessories page, but if you don’t see the bracelet for this specific watch, please ask.
Specifications
Case size: 40mm
Lug to lug: 47.5mm
Lug width: 20mm
Height: 12.95mm
Movement: Sellita SW200-1 automatic
Questions
If you have any questions about this watch or strap options, or would like to reserve it, just get in touch. We’re specialists in Christopher Ward watches and are always happy to help.
Quick facts
Reference: C60 Trident Mk3 Pro 600
Category: Dive
Size: Medium
Movement: Automatic
Condition: Very good
Christopher Ward (manufacturer) warranty: Expires December 2027
Buy it if you want: a refined diver with a higher spec than its Trident Pro 300 baby brother.
Description
The Trident Mk3 Pro 600 sits at the point where Christopher Ward’s dive‑watch design had fully settled. Following the broader Mk3 refresh launched in 2019, the Pro 600 carried forward the Light‑Catcher case, simplified dial language and calmer handset that marked the Trident’s coming of age. Rather than leaning into overt tool‑watch signalling, the emphasis was on cohesion and wearability. Despite its 600‑metre rating, the Pro 600 no longer felt defined by depth alone. It became the reference point for the modern Trident: balanced, confident and refined enough that later changes would be evolutionary rather than corrective.
What distinguished the Mk3 Pro 600 was a series of measured design decisions. The new Light‑Catcher case introduced cleaner transitions between surfaces and reduced perceived bulk on the wrist. Dial and handset were simplified, with the heavier Mk2 hands replaced by a more restrained design and the long‑standing lume pip at twelve removed entirely. Bracelets were reworked to suit the new case profile, gaining improved articulation and quick‑release spring bars. Case sizes were rationalised to 38mm, 40mm and 42mm, finally drawing a line under the earlier 43mm format.
Condition and performance
The watch is in very good condition with light signs of use.
Case: Clean with light marks observed on the lugs and side
Bezel: No marks observed
Crystal: Clear, no marks observed
Supplied on a CW bracelet with ratchet micro-adjust and quick release lugs showing light marks consistent with wear. Measures 16cm so will fit a wrist up to c. 20.5cm. Please ask if you need more links.
Comes boxed with owner’s manual, cleaning cloth (no case) and warranty booklet/card. Missing plastic insert.
Timegrapher: Approximately +11 seconds per day.
Strap options
Head only: £100 reduction
Replacement of existing bracelet for a standard unworn CW strap: £60 reduction.
Additional standard unworn CW strap: £50 increase
Subject to availability, standard unworn CW straps comprise vintage oak leather, hybrid, rubber and tropic.
Please send us a message and we will adjust the price accordingly.
We also offer 10% off our straps and bracelets listed in Accessories purchased alongside a watch.
Simply add the accessory to your basket and use STRAP10 or BRAC10 at checkout.
Generally, we list all our bracelets on our Accessories page, but if you don’t see the bracelet for this specific watch, please ask.
Specifications
Case size: 40mm
Lug to lug: 47.5mm
Lug width: 20mm
Height: 12.95mm
Movement: Sellita SW200-1 automatic
Questions
If you have any questions about this watch or strap options, or would like to reserve it, just get in touch. We’re specialists in Christopher Ward watches and are always happy to help.